Melstar T
Crystalline iron sulfate
- High solubility in water, even at low temperatures
- Leaves no residue when dissolved
- For professional use only
The range can vary between stores. Contact the store to ensure the product you are looking for is available.
Description
FAQ
Description
Melstar T
A fertilizer additive used in agrochemicals, municipal and industrial wastewater treatment, and in drinking water production as a separation and flocculation agent. It also acts as a precipitating agent in sludge dewatering.
Dosage
| Substance | Iron(II) sulfate (1:1) heptahydrate |
| Form | Light green crystals |
| Specific density | 1,1 t/m³ |
| pH value | 3.6 (in water: 400 g/l at 20˚C) |
| Maximum dose in drinking water production | 50 g Fe/m³ (according to KIWA/ATA) |
| Odor | Odorless |
Solubility
| Water Temperature | Solubility | Density |
| 10°C | 400 g/l | 1,20 kg/l |
| 20°C | 500 g/l | 1,25 kg/l |
– The solution freezes at -2 °C regardless of concentration.
Synonymous trade names: Ferrous Sulfate, Ferrous Sulfate Heptahydrate, Iron(II) Sulfate, Iron(II) Sulfate Heptahydrate.
Chemical Analysis
| Fe2+ | 17,6 % | Pb | 0,1 ppm |
| Moisture | 4 % | Cd | < 0,03 ppm |
| Insoluble matter | 0,09% | Hg | < 0,01 ppm |
| Ni | 39 ppm | Cr | 7 ppm |
| Hg | < 0,1 ppm | As | < 0,1 ppm |
| Zn | 59 ppm | Sb | < 0,1 ppm |
| Cu | 0,6 ppm | AOx | < 2 ppm |
Note: Avoid getting Melstar T on paving stones, concrete surfaces, or decorative stone, as it may cause staining that is very difficult to remove. Do not walk on treated areas until fully dry. Do not exceed the recommended number of applications per season for best results. Overapplication may cause damage—ensure adequate water is used during mixing.
CAS Number: 7782-63-0
Melstar T is delivered in a 25 kg PE bag and is available on order.
FAQ
Unfortunately, there are no questions to show for this product.
No answer to your question? Send it to us here!
Melstar T
A fertilizer additive used in agrochemicals, municipal and industrial wastewater treatment, and in drinking water production as a separation and flocculation agent. It also acts as a precipitating agent in sludge dewatering.
Dosage
| Substance | Iron(II) sulfate (1:1) heptahydrate |
| Form | Light green crystals |
| Specific density | 1,1 t/m³ |
| pH value | 3.6 (in water: 400 g/l at 20˚C) |
| Maximum dose in drinking water production | 50 g Fe/m³ (according to KIWA/ATA) |
| Odor | Odorless |
Solubility
| Water Temperature | Solubility | Density |
| 10°C | 400 g/l | 1,20 kg/l |
| 20°C | 500 g/l | 1,25 kg/l |
– The solution freezes at -2 °C regardless of concentration.
Synonymous trade names: Ferrous Sulfate, Ferrous Sulfate Heptahydrate, Iron(II) Sulfate, Iron(II) Sulfate Heptahydrate.
Chemical Analysis
| Fe2+ | 17,6 % | Pb | 0,1 ppm |
| Moisture | 4 % | Cd | < 0,03 ppm |
| Insoluble matter | 0,09% | Hg | < 0,01 ppm |
| Ni | 39 ppm | Cr | 7 ppm |
| Hg | < 0,1 ppm | As | < 0,1 ppm |
| Zn | 59 ppm | Sb | < 0,1 ppm |
| Cu | 0,6 ppm | AOx | < 2 ppm |
Note: Avoid getting Melstar T on paving stones, concrete surfaces, or decorative stone, as it may cause staining that is very difficult to remove. Do not walk on treated areas until fully dry. Do not exceed the recommended number of applications per season for best results. Overapplication may cause damage—ensure adequate water is used during mixing.
CAS Number: 7782-63-0
Melstar T is delivered in a 25 kg PE bag and is available on order.
Det finns tyvärr inga frågor att visa för denna produkt.
No answer to your question? Send it to us here!
